| Customization: | Available |
|---|---|
| After-sales Service: | Yes |
| Warranty: | Yes |
|
Still deciding? Get samples of US$ 80/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Technical Parameters
T45 Button Bit
| Bit Dia. | Buttons and Size (mm) | Flushing Hole | Weight | ||||
| mm | inch | Front | Gauge | Angle | Front | Side | kg |
| 70 | 2 3/4 | 4x11 | 8x11 | 40° | 2 | - | 2.5 |
| 70 | 2 3/4 | 3x11, 1x9 | 6x11 | 35° | 3 | - | 2.5 |
| 70 | 2 3/4 | 4x10, 1x10 | 8x11 | 35° | 4 | - | 2.5 |
| 76 | 3 | 4x11 | 8x11 | 40° | 2 | - | 3.2 |
| 76 | 3 | 5x11 | 8x12 | 35° | 2 | 1 | 3.2 |
| 76 | 3 | 3x11, 1x11 | 6x13 | 35° | 3 | - | 3.2 |
| 76 | 3 | 4x11, 1x11 | 8x11 | 35° | 4 | - | 3.2 |
| 76 | 3 | 4x11, 1x11 | 8x12 | 35° | 4 | - | 3.2 |
| 89 | 3 1/2 | 4x13 | 8x13 | 40° | 2 | - | 5.4 |
| 89 | 3 1/2 | 6x11 | 8x12 | 35° | 2 | - | 5.4 |
| 89 | 3 1/2 | 3x11, 2x11 | 6x13 | 35° | 3 | 1 | 5.4 |
| 89 | 3 1/2 | 4x11, 1x11 | 8x12 | 35° | 4 | - | 5.4 |
| 89 | 3 1/2 | 4x13, 1x13 | 8x13 | 35° | 4 | - | 5.4 |
| 102 | 4 | 5x14 | 8x14 | 40° | 2 | - | 6.8 |
| 102 | 4 | 6x13 | 8x16 | 40° | 2 | 1 | 6.8 |
| 102 | 4 | 3x13, 2x13 | 6x14 | 35° | 3 | 1 | 6.8 |
| 102 | 4 | 4x13, 1x13 | 8x14 | 35° | 4 | - | 6.8 |
| 102 | 4 | 4x13, 2x13 | 8x13 | 35° | 4 | 1 | 6.8 |
| Bit Face Shape | Introduction |
| Drop Center Face | For high penetration rates in soft to medium hard and fissured rock formations, Low to medium air pressures. Maximum hole deviation control. |
| Concave Face | The all-round application bit face specifically for medium hard and homogeneous rock formations. Good hole deviation control and good fishing capacity. |
| Convex Face | For high penetration rates m soft to medium-hard with low to medium air pressures. It is the most resistance to steel wash. And many reduce the load and wear on the gauge buttons. But poor hole deviation control. |
| Double Gauge Face | This kind face shape is suitable for fast penetration rates in medium to hard rock formations. Designed for high air pressures and good resistance to steel wash step gauge bit. |
| Flat Face Bit | This kind of face shape is suitable for hard to very hard and abrasive rock formations in applications with high air pressure. Good penetration rates are resistance to steel wash. |
Product advantage
1. High-strength structure alloy steel and carbide.
2. Transmit intensive impact energy into the rock with the least loss of energy.
3. Longer service life.
Product specifications:
Thread: R22, R25, R28, R32, R35, R38, T38, T45, T51, T58, T60, T68
Button bit face design: Flat face, drop centre,
Normal and Retrac, Sprial retract body.
Tungsten carbide (Buttons): Spherical, ballistic and Conical. (Threaded R32, R38, T38, T45, T51, bit diameter: 43mm-152mm);
Main button bits diameters:
R32-45mm, R32-51mm, R32-64mm, R32-76mm, R32-89mm
T38-64mm, T38-76mm, T38-89, T38-102mm,
T45-76mm, T45-89mm, T45-102mm,
T51-89mm, T51-102mm, T51-127mm
T58-89mm, T58-102mm, T58-115mm, T58-127mm
T60-102mm, T60-115mm, T60-127mm, T60-152mm
T68-115mm, T68-127mm, T68-140mm, T68-152mm
Other sizes and models are available according to your requests.
About us
Sollroc button bit is made by high quality tungsten carbides and steel,through heat treatment so that it can be used for hard rock drilling,and transmit intensive impact energy into the rock with the least possible loss of energy.Sollroc provides leading strength and penetration rates for more productivity,excellent straightness and hole clean quality,get max drilling performance to save up fuel cost rate.
We can also design and manufacture according to customers'samples or drawings of the diameter,buttons and flushing holes quantity,button shape and face shape.
){kind=link}