Product Introduction
Reverse Circulation drilling, or RC drilling, is a method of drilling which uses dual wall drill rods that consist of an outer drill rod with an inner tube. These hollow inner tubes allow the drill cuttings to be transported back to the surface in a continuous, steady flow
Unlike diamond drilling, it compiles sample rock cuttings instead of rock core. The drilling mechanism is most often a pneumatic reciprocating piston called a hammer, which in turn is driving a tungsten-steel drill bit, specifically made to be able to crush hard rock.
The hammer is used to remove rock samples which are pushed through the machine with compressed air. When air is blown down the annulus (ring-shaped structure) of the rod, the pressure shift creates a reverse circulation, bringing the cuttings up the inner tube. When the cuttings reach a deflector box at the top of the rig, the matter is moved through a hose attached to the top of the cyclone.
The drill cuttings will travel around the cyclone until they fall through the bottom opening into a sample bag. These bags are marked with the location and depth of the place where the sample was collected and can be transported directly to the assay lab for analysis.
Technical Parameters
Sollroc hammer technical parameters
Hammer |
Bit Shank |
Hole Range
(mm) |
External Diameter
(mm) |
Length (less bit)
mm |
Weight
(kg) |
Connection Thread |
Working Pressure |
3''-SRC531 |
SRC531 |
84-100 |
81 |
1069 |
29 |
3" Remet |
1.5-3.5Mpa |
3.5''-SRC3.5Y |
SRC3.5Y |
98-115 |
94 |
1184 |
44 |
3" Remet |
1.5-3.5Mpa |
4''-SRC004 |
SRC004 |
111-127 |
107 |
1252 |
52 |
3.5" / 4" Remet
4" Metzke |
1.5-3.5Mpa |
4.5''-SRC542 |
SRC542 |
113-130 |
109.5 |
1191 |
57 |
3.5" / 4" Remet
4" Metzke |
1.5-3.5Mpa |
4.5''-SRC543 |
SRC543 |
120-135 |
116 |
1191 |
63 |
3.5" / 4" Remet
4" Metzke |
1.5-3.5Mpa |
4.5''-SRC545 |
SRC545 |
122-135 |
117.5 |
1261 |
65 |
4" / 4.5" Remet
4" / 4.5" Metzke |
1.5-3.5Mpa |
5''-SRC40 |
SRC40(SRC040) |
124-142 |
120.5 |
1362 |
80.5 |
3.5" / 4.5"Remet 3.5" / 4.5"Metzke |
1.5-3.5Mpa |
5.5''-SRC52/52R |
SRC52/SRC52R |
126-142 |
121 |
1227 |
68.5 |
4" / 4.5"Remet
4" / 4.5"Metzke |
1.5-3.5Mpa |
5.5''-SRC547 |
SRC547 |
130-146 |
124.5 |
1270 |
74 |
4.5" Remet
4.5" Metzke |
1.5-3.5Mpa |
5.5''-SRC54/54R |
SRC54(SRC54R) |
135-150 |
130 |
1294 |
84.5 |
4.5"Remet 4.5"Metzke |
1.5-3.5Mpa |
Product Features
1.High rate of penetration.Penetration rates often exceed 80 m per shift depending on ground conditions. The speed of drilling can often mean big cost savings compared to slower drilling methods.
2.RC is relatively insensitive to ground conditions, which may be difficult or slow to penetrate using other methods. As a matter of fact, dual-pipe RC was originally developed as a method to penetrate geological formations (such as permafrost, glacial till, broken rock, etc.) where conventional drilling methods were costly and ineffective.
Detailed photo
About us:
At sollroc, customer satisfaction is our top priority. Our sales team takes a proactive approach in meeting customers' needs. We take the time to get to know you and learn about your operations so we can better assist you. We strive to meet customers' needs by supplying the tools and equipment you need when you need them, providing product support, and following through with excellent customer service every step of the way.
Delivery & Package
Delivery: By air, By sea or By express
Package: Ply-wooden cases + Pallet